|
4.4gal Expansion Tank
Diaphragm-type pre-pressurized expansion tank specifically designed for potable hot water systems. These tanks control water pressure build-up and eliminate relief valve spillage caused by thermal expansion when water is heated. 3/4" Male pipe thread connection. Requires no maintenance. Required by code in many counties and states. Use model No. 993-024 for self-piercing valve. Specifications: Models G5, G5L, G12, G12L; Maximum allowable working temperature: 200 deg. F.; Standard factory precharge: 40PSIG (Relief valve must be set at 150PSIG). Maximum pressure maintained at least 10\% below relief valve setting (150PSIG); Models are listed with IAPMO (International Association of Plumbing and Mechanical Officials) and SBCCI (Southern Building Code Congress International); Models are NSF (National Sanitation Foundation) Listed for liner only.
View Details
|
406139 |
4.4gal Expansion Tank |
1 |
89.99 |
/ EA |
G12L |
|
|
2gal Expansion Tank
Diaphragm-type pre-pressurized expansion tank specifically designed for potable hot water systems. These tanks control water pressure build-up and eliminate relief valve spillage caused by thermal expansion when water is heated. 3/4" Male pipe thread connection. Requires no maintenance. Required by code in many counties and states. Use model No. 993-024 for self-piercing valve. Specifications: Models G5, G5L, G12, G12L; Maximum allowable working temperature: 200 deg. F.; Standard factory precharge: 40PSIG (Relief valve must be set at 150PSIG). Maximum pressure maintained at least 10\% below relief valve setting (150PSIG); Models are listed with IAPMO (International Association of Plumbing and Mechanical Officials) and SBCCI (Southern Building Code Congress International); Models are NSF (National Sanitation Foundation) Listed for liner only.
View Details
|
405264 |
2gal Expansion Tank |
1 |
69.99 |
/ EA |
G5L |
|
|
115v Utility Pump & Hose
Heavy-duty plated bronze volute for durability. Portable and lightweight transfer pump you can take anywhere. Removes water down to 1/8" of surface when water suction attachment is connected. Includes 6' suction hose, water suction attachment, and replacement parts kit.
View Details
|
432946 |
115v Utility Pump & Hose |
2 |
119.99 |
/ EA |
PC2 |
|
|
1/6hp Subm Utility Pump
Portable electric water removal pump. High flow rate, oil-free pump removes water down to 3/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/6 HP (horsepower); max. flow rate is 3000 GPH (gallons per hour); 1850 GPH at 10' of discharge lift. 1-1/4" discharge with 3/4" garden hose adapter. For removing water from flooded basements, boats, low-lying outdoor collection spots.
View Details
|
450545 |
1/6hp Subm Utility Pump |
5 |
97.99 |
/ EA |
RUP160 |
|
|
 |
SR501-1 |
Taco Sr501-1 |
2 |
81.95 |
/ EA |
SR501-1 |
|
|
Taco 007 Circulator
NEW TACO 007F FLANGED CAST IRON CARTRIDGE CIRCULATOR PUMP SOLAR HOT WATER HOME
Compact design
Maintenance free, unmatched reliability
Quiet, efficient operation
Field serviceable replacement cartridge
Direct drive, low power consumption
Self lubricating
No mechanical seal
View Details
|
TACO007 |
Taco 007 Circulator |
2 |
165.95 |
/ EA |
TACO007 |
|
|
Taco Circulator Gasket
TACO Circulator Red Gasket is designed to be used with your boiler system's circulator pump. This gasket is made of rubber and has a bright, red finish. Durable and long lasting.
Pre-punched bolt holes
Compatible with most boiler pumps
Creates a water proof seal at pump to flanges
Construction is of the highest quality rubber
View Details
|
TACOGAS |
Taco Circulator Gasket |
4 |
2.95 |
/ EA |
|
|
 |
(m) Cable Protector
Pentair Water
CABLE PROTECTOR
Cable protector for submersible pumps
View Details
|
4850426 |
(m) Cable Protector |
1 |
6.59 |
/ EA |
TC-2171 |
|
|
1-1/4" Foot Valve
Pentair Water
1-1/4" FOOT VALVE
Aids in priming pump
For well pumps
Protects against loss of prime
Protects pump from large debris
Use as inlet of suction pipe
View Details
|
4695565 |
1-1/4" Foot Valve |
2 |
32.99 |
/ EA |
TC2501 |
|
|
1/3hp Plastic Sump Pump
Pumps up to 2500 GPH at 0'. Reinforced thermoplastic submersible sump pump. Piggyback tether float switch for automatic or manual operation. Top suction design filters debris and prevents clogging from debris in bottom of sump pit. Designed for easy installation without any plumbing changes. High performance 1/3 HP motor. 1-1/2" NPT discharge and reinforced thermoplastic base.
View Details
|
408239 |
1/3hp Plastic Sump Pump |
2 |
129.99 |
/ EA |
WST33 |
|
